Protac SenSit Straight Instrucciones De Uso página 12

Dismantling instructions before wash:
Remove the innerbag from the neck support. Do not wash!
1.
2. Remove the ball bags from the side-/neck wings. The ball bags must be washed separately.
Use the enclosed laundrybag
3. Remove the seat cushion from the chair, unzip the cover with plastic balls and the
incontinence cover.
4. Remove the 3 inner bags from the back pillow (one with plastic balls and two with
polystyrene granulate). NB! Do not wash the two inner bags of polystyrene granulate!
5. Unzip and take off the chair cover.
6. All zippers must be zipped up before washing.
DK
Assembly after wash:
1. Put the cover on the chair and zip it up.
GB
2. Place the inner bag of polystyrene balls in the neck support.
3. Insert the ball bags in the neck - and side wings. Close the zipper. DON'T FORGET
to attach the ball bags to the neck- and side wings inside with velcro.
DE
4. The seat cushion is fitted with incontinence cover and fabric cover with plastic balls. Close
with a zipper.
5. Place the seat in the chair.
FI
6. Place the three inner bags inside of the back pillow's three compartments (one with plastic
balls, two with polystyrene granulate). IMPORTANT! Place the bag of polystyrene
granulate in the top compartment. Place the bag of plastic balls in the middle
FR
compartment and the other bag of polystyrene granulate in the bottom
compartment.
7. Affix the back pillow under the neck cushion with Velcro.
NL
Accessories
SE Protac SenSit
The Protac SenSit
Using the accessory
ES
IT
General precautions - Safety
• Must not be used by individuals with pressure ulcers on their calves and heels.
• Take care not to trip over the footstool, if the user is unsure of his/her balance.
• Must not be used near an open flame.
12
Puff
®
Puff can be used as a foot/leg rest, together with the Protac SenSit
®
The Protac SenSit
can be used as a foot/
leg rest, together with
the Protac SenSit
Straight.
The Protac SenSit
can be used as a stool.
Puff
®
®
Puff
®
Straight.
®