The following signal words and meanings are intended to explain the levels of risk associated with this product.
SyMBOL
SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper interpretation
of these symbols will allow you to operate the product better and safer.
SyMBOL
Safety Alert Symbol
Read Operator's Manual
Eye Protection
Wet Conditions Alert
No Hands
Risk of Electrocution
Electric Shock
Keep Bystanders Away
Gloves
Hot Surface
Recycle Symbol
V
Volts
A
Amperes
Hz
Hertz
W
Watt
hrs
Hours
Class II Construction
SyMBOLS
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could result
in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result in
minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in property
damage.
NAME
Page 6 — English
EXPLANATION
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand op-
erator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Do not expose to rain or use in damp locations.
Sharp cutting blades. To prevent serious injury, do not touch
cutting blades.
DANGER! Risk of electrocution!
Failure to use in dry conditions and to observe safe practices
can result in electric shock.
Keep all bystanders at least 50 ft. away.
Wear non-slip, heavy-duty protective gloves when handling
the blades.
To reduce the risk of injury or damage, avoid contact with any
hot surface.
This product uses nickel- cadmium (Ni-Cd) batteries. Local, state,
or federal laws may prohibit disposal of batteries in ordinary
trash. Consult your local waste authority for information regarding
available recycling and/or disposal options.
Voltage
Current
Frequency (cycles per second)
Power
Time
Double-insulated construction