Tabla de contenido
Publicidad
Manual de Usuario
SENSOR DE HUMO LX98
Installation
INSTALACION
1.
Press the lock button on the underpan, and turn the underpan counterclockwise to make it separate
1
from the product's body.
2.
place the underpan on the selected installation position, and use pencil make hole mark alon
2
installation hole on the underpan.
Installation
3.
use electric drill with 6.5mm drill bit to drill two installation holes(! 6.5,depth 35mm) on the mark.
3
1.
Press the lock button on the underpan, and turn the underpan counterclockwise to make it separate
from the product's body.
2.
place the underpan on the selected installation position, and use pencil make hole mark alon
installation hole on the underpan.
3.
use electric drill with 6.5mm drill bit to drill two installation holes(! 6.5,depth 35mm) on the mark.
4
4.
strike plastic dilatant into installation
5
holes,
fix
the
installation hole with 3x30 screw
6
4.
strike plastic dilatant into installation
with gasket and tighten the screws.
holes,
5.
fix in 9v cascading battery, before
installation hole with 3x30 screw
fixing it push the red thimble into
with gasket and tighten the screws.
5.
fix in 9v cascading battery, before
7
fixing it push the red thimble into
www.seguridadtotal.com.ar
www.seguridadtotal.com.ar
LIVING ROOM
BEDROOM
SMOKE ALARM FOR MINIMUM PROTECTION
SMOKE ALARM FOR ADDITIONAL PROTECTION
DIAGRAM 3
underpan
on
fix
the
underpan
BASEWENT
DIAGRAM 4
DIAGRAM 3
on
KITCHEN
PUSH
PUSH
www.lexing
Publicidad
Tabla de contenido
