To Use The Battery Charger Correctly - Tecnotest Smart Charger Manual Operativo


SMART CHARGER _________________________________________________________________________

TO USE THE BATTERY CHARGER CORRECTLY

Comply with the following instructions in order to use your Battery Charger in complete
safety:
•
Smart Charger must be installed in a dry and well ventilated place so that it can be
allowed to cool. Never expose the instrument to direct sunlight or use near heat
sources.
•
Prevent the instrument from being hit or sharply moved.
•
Never obstruct the ventilation slats of the instrument.
•
Never wet the instrument with water or other liquids. Do not touch it with wet
hands.
•
Never rest anything on the powering cable and never bend this at a right angle.
•
Never pull the powering cable or charging cables (red and black).
•
Always disconnect the powering cable if the instrument is to remain unused for a
long period of time.
It is advisable to keep the wrapping and to use it again if the instrument is
moved to another site.
30 OPERATING INSTRUCTIONS