Publicidad
Idiomas disponibles
Idiomas disponibles
1.
Hook
2.
COB LED bulb
3.
Lens
4.
Charging indicator
5.
Adjustable switch
6.
Handle
7.
Charger socket
8.
Magnet on the base
9.
USB cable
Specifications： ： ： ：
Charging time： ： ： ： 4-5hours
Working time： ： ： ： 3-4hours（ （ （ （ high mode） ） ） ）
15hours （ （ （ （ low mode） ） ） ）
Luminous Flux： ： ： ： 0-400 lumen(by Adjustable switch)
Battery:3.7V 2600MAH Lithium battery
Warning
This device utilizes rechargeable Lithium ion battery that can rupture, ignite and cause series injury if missed
usage. Observe the follow safety rules;
DO NOT place battery and device in fire or high temperature
DO NOT tamper with battery wiring
DO NOT puncture or damage battery
DO NOT use battery that appears damaged
DO NOT immerse or expose battery to water
DO NOT alter or modify the battery
DO NOT attempt changing the battery in any manner other than that prescribed in this manual.
DO NOT dispose of the battery in fire or water.
Failure to heed these warning may result in personal injury and/or property damage.
Assembly and use
1, charging
Connect the charger into charging socket (7), which is located on the side of work light
Connect the USB charger to a power supply.
The charging indicator (4) will illuminate to show the charging has started.
NOTE: The charging indicator will turn green when the lamp is fully charged .
Disconnect the charger from the work light when it has been charged for a sufficient time.
2, operating the lamp
CAUTION: Never shine the LED light directly into your or anyone else's eyes .
1. Choose the desired working mode with the adjustable switch.
2. The lamp can be mounted to a metal surface with the magnet on the base(8)
Publicidad
