Hailo ProfiStep multi Instrucciones De Montaje página 8

When erected parallel to a wall, the
scaffolding must only be moved in a
lengthwise direction. In doing so, care
must be taken over obstacles at height.
To move the aluminium scaffolding in
its assembled state, the stabilizer bar
should only be lifted so far that the feet
of the stabilizer bars are a maximum of
3 cm above the ground. The scaffol-
ding should not be crashed into any
obstacle.
It is not permitted to move the scaffol-
ding on an inclined surface.
When moving the scaffolding, wind
conditions must be taken into account.
•
ttaching bridging elements between
the aluminium scaffolding and a buil-
ding is not permitted.
•
Leaning out over the side protection or
bracing oneself against the side protec-
tion is not permitted.
•
ttaching and using lifting equipment
and devices is not permitted.
Movement of tools and materials is only
permitted via the access openings provi-
ded on the scaffolding, i.e. through the
opened access hatch.
When not in use, the access hatch is to
be kept closed.
•
Jumping on the working platform is not
permitted.
•
The maximum permitted load on the
working platform is 135 kg.
•
The height of the laminated working
platform is not to be increased by using
ladders, boxes or other devices or
equipment.
9
GB