OHAUS 80500503 Manual De Instrucciones página 4

Find Quality Products Online at:
Alibi Memory Option Kit
2.2 Installation in T71XW
WARNING: ELECTRICAL SHOCK HAZARDS EXIST WITHIN THE
HOUSING. THE HOUSING SHOULD ONLY BE OPENED BY AUTHORIZED
AND QUALIFIED PERSONNEL. REMOVE ALL POWER CONNECTIONS TO
THE UNIT BEFORE OPENING. IF THE UNIT CONTAINS AN OPTIONAL
RELAY CONTROL BOARD, ADDITIONAL AC OR DC POWER
CONNECTIONS MAY STILL EXIST WITHIN THE HOUSING.
Refer to Figure 2.2 when performing these steps.
1. Remove the hex bolts from the corners of the rear housing.
2. Pull the front housing forward.
3. Install the support post in the hole of the Main pc board.
4. Attach the 8 pin connector of the Alibi memory pc board to Connector J2 and
support post on the Main pc board.
5. Close the housing and reinstall the four hex bolts.
Support post Alibi pc board
Connector J2
GlobalTestSupply
www.
Figure 2.2. T71XW
EN-3
.com
sales@GlobalTestSupply.com