EGO POWER+ NEXUS POWER STATION PST3040 Manual Del Operador página 22

3. Press the power button to turn on the Nexus power station. The Nexus power
station will be in the self-check mode and all indicators on the LCD screen will
illuminate for less than 1 second. Then the LCD screen will recover to normal
indication.
For example, 2 batteries BA1400T are located in position 1 and 4. They have 70%
and 30% capacity respectively. The rated maximum output power is 1200W. The LCD
screen will display as shown in Fig. 6. The time "88 hours" indicated on the LCD screen
is estimated automatically, based on the rated power.
6
4. Press the AC and/or USB button (see Fig. 1c), as appropriate, to charge the AC
and/or USB devices. When the device that is connected is turned on, the time
displayed will change and the corresponding actual output power indicator will
illuminate certain segments based on the actual output power.
For example, for 1000W device (within 1200W), the estimated available runtime is 10
mins, with several number of segments indicating the actual output power (Fig. 7).
7
22
56-VOLT NEXUS POWER STATION - PST3040/ PST3040-FC
Actual Output Power Indicator