GE 3555 Manual De Instrucciones página 6

6
the OFF/CHIME/ALARM switch. Make sure
switch is in OFF position. Make sure the
surface you are mounting to is clean and
dry. For best results, clean the mounting
surface with a mixture of 50% isopropyl
alcohol and 50% water.
2. Peel the protective covering from one side
of the double-sided tape and then apply to
the back of the alarm. Remove protective
covering from the back side of the double-
sided tape and lightly mount the alarm or
the magnet on the part of the entry that
opens (i.e. the window or door itself)