1
2
Installation
As an alternative to table mounting, the unit can be wall mounted
using the support supplied with it.
Fasten the wall support to the wall (fig. 4). Install the unit by secu-
ring it to the support with the provided bracket (fig. 5).
Make sure ventilation is adequate if housed in an enclosure for
racks.
Satellite or digital terrestrial video card insertion
Ensure that the unit is disconnected from the network. Remove
the cover of the unit (fig. 6) and insert the card in the slot (fig. 7).
Lock the card onto the rear panel with the two screws (fig. 7). Put
the cover back in place.
Disposal
Do not litter the environment with packing material: make sure it
is disposed of according to the regulations in force in the country
where the product is used.
When the equipment reaches the end of its life cycle, take mea-
sures to ensure it is not discarded in the environment.
The equipment must be disposed of in compliance with the reg-
ulations in force, recycling its component parts wherever possi-
ble. Components that qualify as recyclable waste feature the rel-
4
evant symbol and the material's abbreviation.
1
5
1
2
2
6
7
7