INTERTECHNO ITH-610 Manual De Instrucciones página 29

GB
610
The wireless thermostat for radiators can be controlled by any intertechno teaching
yy transmitter.
Choose 2 different temperatures using up to 4 transmitters or using the intertechno
MasterGate via smartphone or tablet.
It also features a weekly programme and holiday mode, which allows you to adjust the
temperature manually at any time.
Inserting the batteries: Fig. 1
Open the battery cover on the bottom and insert 2 x 1.5 volt Mignon/AA batteries,
making sure the ends are facing the correct direction (negative end against the
olmen spring).
When changing the battery, the data will remain saved for approximately 1 minute.
Mounting on the radiator valve: Fig. 2
Mount the wireless thermostat on the radiator before you change any settings and
before you teach in the transmitter.
uo- The accessory pack contains adapters for the most common radiator valves.
Threaded valves:
There are two common valve sizes, M30 x 1.5 and M28 x 1.5:
M30 x 1.5: The wireless thermostat is simply screwed on directly with the
M28 x 1.5: The wireless thermostat is screwed on with the white ring, ensuring the
Danfoss valves: Fig. 3
Push the adapter all the way up, paying attention to the groove in the valve.
NOTE: For RAV valves you will need to use the pin provided.
Setting the date and time:
Use the dial to enter the year, month and day and confirm each entry with the OK
button.
The hour will flash. Set the time using the dial and then press OK.
Once you have adjusted the minutes using the dial and pressed OK to confirm, the
thermostat will adapt to the heating valve.
InS will be shown on the display. Press the OK button and AdA will be displayed.
Finally, press OK again to adapt to the radiator valve.
(if there is a faulty connection, error code F1, F2 or F3 will appear)
Setting 2 temperatures (night and daytime temperature):
Press the
Select the temperature and confirm using the OK button.
Next, select the night temperature
Teach in the intertechno transmitter:
All teaching transmitters can be taught in, including our Smarthome products. 4
transmitters can be taught in per thermostat.
Press the Menu button until Pro appears on the display.
Turn the dial until rFs appears on the display.
Operating instructions
grey ring.
washer is inserted first.
button until the daytime temperature appears on the display.
and press OK.
ITH-610