Cleaning And Maintenance; Cleaning The Shaver Head - Silk’n ND8001 Manual De Usuario

press the control button
EN
5. Position the shaver at a 90° angle on your skin.
6. Slowly run the shaver opposite the direction of hair growth on the part of
your body you are shaving.
7. To switch the device off, press the control button
in the low speed mode and one time if you are in the high speed mode.
After shaving, apply body lotion or baby powder to the applicable
parts of your skin.

Cleaning and maintenance

NOTICE! RISK OF DAMAGE!
Improper handling of the shaver may result
in damage.
• Do not in any case place the shaver in the
dishwasher. The shaver would be destroyed
as a result.
• Take the batteries out of the battery com-
partment before you clean the shaver.
• Do not hold the shaver submerged in wa-
ter (max. 1 m) or under running water for
more than 20 minutes.

Cleaning the shaver head

1. Push the two release points
12
for a second time.
4
at the same time and pull the shaving foil
3
two times if you are
4