Light Bulb - Futuro Futuro WL36CONNECTICUT Manual De Instrucciones

To install the new fi lters see picture.
In case of hood with the motor box the filter is located on the botton part
of the motor box.
To install the new fi lters see picture.
To order new filters, use the coupon enclosed with this booklet or provided
by the distributor.
I
LIGHTING

1. LIGHT BULB

To replace the light bulb:
a) Make sure the appliance is disconnected from the mains power supply.
b) Unscrew the support screw A and remove the light cover.
c) Replace the light bulb with the same model as the original (max 25 W, see
the markings near the light).
A
WARNING! Light bulbs with different shapes and power ratings from the
original may seriously damage the light compartment.
2. SPOTLIGHT
To replace the lamp for "Round halogen light":
a) Make sure the appliance is disconnected from the mains power supply.
b) Remove, by levering with a screwdriver, the support ring A for the cover glass.
c) Remove the cover glass B to access the light compartment.
d) Replace the lamp with the same type (halogen, max 20 W, 12 Volt, G4 fitting).
e) Replace the glass cover B and fasten it using the special ring A.
ASSEMBLY AND REPLACEMENT
21