Truvox International Orbis UHS Cordless Burnisher Manual Del Usuario página 4

Please refer to machine pictures on page 1
1 Interlock button, left
or right
Used to switch motor
ON and OFF. Can
only be operated with
handle in working
position, and if left
hand interlock button
has previously been
depressed.
2
Switch trigger, left
or right
Used to switch motor
ON and OFF. Can
only be operated with
handle in working
position, and if left
hand interlock button
has previously been
depressed.
3 Handle adjustment
lever
Used to adjust handle
to comfortable
working height. Note:
For safety reasons
the machine cannot
be operated unless
the handle is moved
to a working height.
1. Product information
These commercial floor treatment machines are designed
for the high speed polishing and burnishing of hard floors
in indoor areas. A passive dust control system is supplied
as standard with each model. This commercial battery
powered Cordless Burnisher is the latest innovation at the
forefront of daytime cleaning. Its quietness of operation
and compact design make it ideal for use in a variety of
environments. Maintenance free (gel) batteries must be
used which provide up to 2 hours running time. A battery
life indicator allows operator to assess the degree of
battery life available, and an on board battery charger
provides convenient charging. The machine can be fitted
with an optional handle mounted cleaning solution spray
system, which can be operated whilst gripping the handle
with both hands thereby maintaining full control of the
machine. The machine is intended for commercial use, for
example in hotels, schools, hospitals, factories, shops,
offices, rental businesses and other than normal
housekeeping purposes.
The following instructions contain important information
about the machines and safety advice for the operator.
These instructions are valid for the following models:
Orbis Cordless Burnisher – OCB451500...
4 Solution feed lever
Operates flow valve in
spray bottle (if fitted).
- Pull lever to release
solution.
- Release lever to
stop flow.
5 Handle
6 Battery cover
7 Motor cover
8 Brush guard
9 Battery life indicator
Gives indication of
battery life available.
10
Key operated switch
Switches battery
power ON and OFF.
11 Battery charging
lead
Connects machine to
electricity supply for
battery charging.
12 Battery charge
indicator lights
Shows charge state of
battery.
Equipment must be operated, serviced and maintained in
accordance with the manufacturer's instructions. If in
doubt contact the supplier of your machine.
1.1 Important safety advice
When using
precautions should be followed, including the
following:
• This machine must only be used for the manufacturer's
approved application as described in this manual.
• Please note that the safety information described in the
manual supplements and does not replace standards in
force in the country in which the machine is used.
• WARNING - Only use accessories and spare parts
provided with the machine or those approved by the
manufacturer. The use of other spare parts or
accessories may impair the safety of the machine.
• CAUTION - This machine is for dry indoor use only and
should not be used or stored outdoors in wet conditions.
• All parts are to be positioned as indicated in the
instructions before using the machine.
• The machine must be unpacked and assembled in
accordance with these instructions before connecting to
the electrical supply.
• DO NOT use where hazardous dust is present.
• DO NOT use in an explosive atmosphere.
• DO NOT pick up or use near flammable fluids, dusts or
vapours.
• DO NOT use to pick up moisture or any liquids.
• DO NOT use to clean up any burning or lighted
materials such as cigarettes, matches, ashes or other
combustible objects.
• Take care when using a machine near the top of stairs
to avoid overbalancing.
• Only use the machine on firm level surfaces. DO NOT
use on a gradient or more than 2% slopes.
• DO NOT operate this machine on rough uneven
surfaces e.g. industrial concrete floors.
• DO NOT use on coarse concrete surfaces.
• DO NOT use outdoors e.g. on patios, decks or rough
surfaces.
• DO NOT sweep over wet surfaces.
• WARNING – Do not fill machine with water hotter than
50°C.
• DO NOT use diesel/petrol or corrosive detergents to
wash floors.
• DO NOT wash and vacuum corrosive, flammable and/
or explosive liquids, even if diluted.
• DO NOT put any object into openings.
• DO NOT use with any opening blocked; keep free of
dust, debris and anything that may reduce airflow.
• DO NOT cover machine when in use.
• DO NOT operate the machine when connected to the
mains electrical supply.
• DO NOT leave the key in the operating switch when not
in use, always remove the key.
• The key of the operating switch must be removed before
commencing cleaning of the machine or undertaking
maintenance operations.
3
this machine, basic safety