Cepra 5300 Manual De Instrucciones página 30

Chronothermostat 5300
In the upper part of the screen, the days of the week start
flashing.
• With the keys, select the group of days : LUN
MAR MIE JUE VIE SAB DOM.
PROG
• Press the key to confirm the programming
LU-DOM
block.
1) Then the hour of the first slot P1 starts flashing.
• With the help of the
of the first slot. The time can be set in steps of 10
minutes.
PROG
• Press the key.
LU-DOM
2) The consignment temperature of the first slot starts
flashing.
• With the help of the
temperature. The temperature can be set in steps of
1 degree.
PROG
• Press the key to confirm the programming
LU-DOM
and going to the next slot. Repeat the steps 1 and 2
until you have programmed the 6 slots.
Finish the programming by pressing the
keys set the start hour
keys set the desired
key.
SET
If you want to modify the programming for any day, do
the following:
Weekly Programming
• Press the
SET
• Press the
SET
press the PROG
LU-DOM
In the upper part of the screen, the days of the week start
flashing.
• With the
modify: LUN ... DOM. The programming will auto-
matically become weekly, and the modified day is
adopted within the programming.
PROG
• Press the
LU-DOM
1) Then the hour of the first slot P1 starts flashing.
• With the help of the
of the first slot. The time can be set in steps of 10
minutes.
PROG
• Press the
LU-DOM
2) The consignment temperature of the first slot starts
flashing.
• With the help of the
temperature. The temperature can be set in steps of
1 degree.
PROG
• Press the
LU-DOM
3 3 0 0
key to go to the main screen.
key and keep pressing it, then
to go to the programming.
keys, select the day you want to
to confirm the day.
keys set the start hour
key.
keys set the desired
key to confirm the programming