Plastic Parts - BERG Toys Freestyler Manual De Usuario

5.4.3 Crank arm as part of 'running in' a new BERG Freestyler
After using the BERG Freestyler for a period of time (a few days of intensive use, up to
two weeks of normal use), the anchoring bolts (see Fig. 5.2) with which the left-hand
and right-hand cranks are attached need to be tightened. Make sure this is done
'manually', i.e. with a maximum tightening torque of 30Nm/22ft.lbs. You can also ask
your dealer, who will be happy to do it for you. (It is normal after a short period of use,
as a result of exertion being placed on the pedals, that the crank arm needs
adjustment. An additional effect of this is that there may be some play, which can lead
to damage to the crank and the crank axle. This play can be eliminated by further
tightening the bolts).
5.5

Plastic parts

Plastic parts needs to be checked regularly for damage and breakage. When a
breakage occurs, the part in question must be replaced immediately by an original
spare part in order to ensure the safety of the user.
EN
Sheet nr. 49.90.50.50