Amplicomms TV Sound-Box Manual De Instrucciones página 22

G G
ERÄTE IN ETTING STARTED
Set up the receiver
Charging the battery
1 Charge the battery for about 6 hours before first use. Switch off the
receiver (position OFF).
Place the receiver onto the transmitter. The charging process starts auto-
matically. The battery LED indicator will be flashing and will glow con-
stantly when the battery is fully charged.
2 When the receiver is not in use or when the low battery indicator blinks,
place the receiver on the base for recharging.
• A fully charged battery provides up to 8 hours of listening enjoy-
ment.
• To conserve battery power, the receiver automatically shuts off if no
signal is detected for a period of approx. 3 minutes. To turn on the
receiver again, after you have turned on the audio source, rotate the
ON/OFF / Volume knob to OFF and then back to ON.
18
B
ETRIEB NEHMEN
Helpline UK 0844 800 6503
(See page 26 for costs and hours of operation)