Technical Specifications - Hudora 72171/00 Instrucciones De Montaje Y De Uso

INSTRUCTIONS ON ASSEMBLY AND USE
EN
CONGRATULATIONS ON PURCHASING THIS PRODUCT!
Please read these instructions carefully. The instructions are an integral compo-
nent of the product. Therefore, please store them and the packaging carefully in
case questions arise in the future. Please always include these instructions
when handing on the product to a third party. This product must be assembled
by an adult. This product is designed for private/domestic use only. This product
is not designed for commercial/industrial use. The use of the product requires
certain capabilities and skills. Always adjust according to the age of the user and
use for the purpose it has been designed for.

TECHNICAL SPECIFICATIONS

Product Name: Rope ladder | Climbing tower
Item No.: 72171/00 | 72172/00
Length: approx. 172 cm | approx. 172 cm
Width: approx. 30 cm | approx. 53 cm
Max. Body Weight: 50 kg | 50 kg
Purpose: Device for climbing exercises in free suspension.
Minimum user age: 3 years
If you have assembly problems or would like further information on the product,
we have all you need and more at http://www.hudora.de/.
CONTENTS
1 x Climbing system (72171/00 or 72172/00)
1 x These instructions
Other parts which may be included with the delivery in some circumstances are
not required.
SAFETY INSTRUCTIONS
• WARNING! Only for domestic use. Only suitable in the outdoors area.
• WARNING! Only use under direct supervision of an adult!
• WARNING! Not suitable for children under 36 months. Danger of falling!
• WARNING! Not suitable for children under 36 months due to long cords!
Strangulation hazard.
• WARNING! Not suitable for children under 36 months. Small part. Choking
Hazard!
• The owners of the product as well as the competent supervisory personnel
are responsible for ensuring that all users follow the instructions in the ope-
ration manual.
• Do not make any technical modifications.
• Changes to the original product must only be carried out according to manuf-
acturer specifications.
• No one is permitted to gain access to the usage area of the product during
use.
• Always hold yourself firmly with both hands.
• No objects of any kind must be in the vicinity of the usage area of the product
(trees, walls, fences, clotheslines).
• Make sure that you have a safety clearance of at least 2 m (front and back)
beyond the maximum reach of the product and make sure the ground is level
and shock absorbing (e.g. grass) without any sharp edges or pointed objects,
obstacles, inclines, levels, steps or hard surfaces (e.g. concrete) etc.
• Clearance to stationary components on the side, such as a swing scaffol-
ding, must be at least 40 cm.
• Maximum raised height must not exceed 220 cm as measured from the
ground.
• Swinging components, such as a neighboring swing must be placed at a di-
stance of at least 60 cm.
• In idle mode, the bottom of the item must be under 50 cm from the ground.
• You should never install the product in such a way that the user could be
blinded by sun rays.
• Suspension connectors shall be of a design that will prevent unintentional
disconnection.
• When permanently irradiated with UV light, the material ages significantly
faster. To avoid premature aging and thereby extend the service life, you
should always store the product in a dry and dark place when not in use. Do
not permanently expose the product to wind, moisture, extreme tempera-
tures or sunlight.
All images are examples of the design.
ASSEMBLY
Prior to installation, carefully select and check the location where you will install
the product. Please make sure that the carrier is adequately stable. Please also
take into account that the use of the product produces centrifugal forces that
can put a lot of strain on the carrier. Please consult an expert (statics expert,
architect, carpenter) and ask how much load your carrier can tolerate.
Please keep an eye for sharp-edged holes and shavings that on this toy that may
have occurred during the manufacturing process and, if required, remove them.
MAINTENANCE AND STORAGE
Check the product for damage or traces of wear and tear before and after each
use.
We also recommend before each use:
• to check for the firm sitting of nuts and bolts, tighten if necessary
• to lubricate moving parts in order to minimize wear
• to check all covers of screws and sharp edges and replace if necessary
• to replace defective parts according to the manufacturer's instructions
• to check seats, rungs, chains, ropes and other means of attachments for
evidence of deterioration
You should also replace all the plastic parts after a maximum of 5 years to pre-
vent a possible failure of these parts.
Use only a dry or damp cloth to clean the product; do not use special cleaning
agents! Check the product for damage or traces of wear and tear before and
after each use. Do not make any structural changes. For your own safety, please
use original spare parts only. These can be sourced from HUDORA. If parts be-
come damaged or if sharp edges or corners should develop, the product may not
be used any more. If in any doubt, please contact our service team (http://www.
hudora.de/service/). Store the product in a safe place where it is protected from
the elements, cannot be damaged, and cannot injure anyone.
DISPOSAL ADVICE
At the end of the product's life, please dispose of it at an appropriate collection
point in your area. Local waste management companies will be able to answer
your questions on this.
SERVICE
We make every effort to deliver faultless products. If faults do arise however, we
put just as much effort into rectifying them. You can find numerous information
on the product, replacement parts, solutions to problems and lost assembly
manuals at http://www.hudora.de/service/.
3/8