Viesta C2Z Manual De Instrucciones página 34

KEN001AKC
Installation
Adjust the bracket position to suit for different work surface's thickness.
Precautions
1. The ceramic cooker hob must be installed by qualified personnel or
technicians.
Do not install yourself, as your warranty expires immediately when not
properly installed.
2. The ceramic cooker hob shall not be mounted to cooling equipment,
dishwashers and rotary dryers.
3. The ceramic cooker hob shall be installed such that better heat radiation can
be ensured to enhance its reliability.
4. The wall and induced heating zone above the work surface shall withstand heat.
5. To avoid any damage, the sandwich layer and adhesive must be resistant to
heat.
6. A steam cleaner is not to be used.
7. This ceramic can be connected only to a supply with system impedance no
more than 0.427 ohm.
In case necessary, please consult your supply authority for system impedance
information.
[English]
[ 34 ]
21.08.2017 • v09