Fit The Feeder; Return Operation - Buffalo DB175 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 32
UK
Operation
Feeder mounting
holes
Belt
Crumb tray
Power level knob
Power indicator light
Belt speed knob
Return chute
WARNING: Take care to avoid touching the surfaces as surfaces remain hot
during and immediately after use.
BUFFALO Conveyor Toasters can be set up to return the toast from the front or rear of the appliance. This
is known as 'Return' or 'Pass-through' operation and can be set up to best suit the kitchen environment.

Fit the Feeder

1. Squeeze the arms of the feeder and slot the arms in to the
feeder mounting holes (Fig. 1).
2. Rest the legs on the outside of the appliance.

Return Operation

To set-up the toaster for return operation:
1. Close the back door of the appliance and fix it in the vertical
position.
2. Slide the return chute in to the bottom of the appliance and
secure it to the two pins located inside the rear of the appliance.
4
DB175_ML_A5_v2 20200409.indb 4
Pass-through chute
Fig. 1
2020/4/9 09:59

Publicidad

Tabla de contenido
loading

Tabla de contenido