Getting Started; Helpful Hints; Care & Cleaning - Twin Star 23WM374 Manual De Instrucciones

P L E A S E R E A D A N D F O L L O W A L L S A F E T Y T I P S
1. Before assembly, CAREFULLY use scissors or utility knife to cut and unwrap all parts. Make sure
you do not discard the hardware.
2. Make sure that you have all the parts listed. If you are missing any parts please email Customer
Service: parts@twinstarhome.com or call 1-866-661-1218 in English, 1-866-374-9203 in French,
1-866-661-1218 in Spanish. Please identify the parts you need and model number. Make sure to
include your name and address.
• Some steps are more easily handled with two adults.
• Attach the f ireplace insert to the completed wood mantel last. INSTALL INSERT IN FROM THE
BACK OF THE FIREPLACE SO AS NOT TO SCRATCH THE HEARTH/BASE.
• Use care in assembling your new f ireplace, take your time and use the hardware provided and a qual-
ity Phillips head screwdriver. NEVER OVER TIGHTEN BOLTS.
• Do not sit on top of the mantel.
1. Dust your fireplace regularly with a soft non-lint producing cloth or household dusting product.
2. You can clean your fireplace with a gentle non-abrasive household cleaner. Make sure to dry your
fireplace immediately with a soft cloth or towel.
For a complete tight fit every bolt
should have a flat washer. First slide a
flat washer onto the bolt. Your bolt is
now ready for use.
Now it is time to assemble your Fireplace. All
panels are labeled Left and Right as viewed
from the front of unit.
1. Locate the Center Front Panel (D), Right Front
Panel (C) and Left Front Panel (B) and set out
face down on the scratch free surface.
Locate the Left Front Panel (B), insert one
2.
Wood Dowel (N) into each of the pre-drilled
holes. Then use Bolt (L) and Washer (M)
through the pre-drilled holes in the mounting
blocks. Attach the side panel to Hearth/
Base (A).
E-2

GETTING STARTED

HELPFUL HINTS

CARE & CLEANING
Left Front
Panel
B
L
M
N
N
Hearth/Base
A