Lighting Unit - Refsta KALISTO Manual De Instrucciones

MAINTENANCE
The filter must be cleaned every 2 months of operation, or more fre-
quently for particularly heavy usage, and can be washed in a dishwasher.
CLEANING METAL SELF- SUPPORTING GREASE FILTER
• Open the lighting unit by pulling on the nocth.
• Remove the filter one by one pushing it towards the back side of the
hood unit and simultaneously pulling downwards.
• Any kind of bending of the filter has to be avoided when washing it.
Before fitting it again into the hood make sure that it is completely dry.
• When fitting the filter into the hood pay attention that they are mounted
in correct position the handle facing outwards.
• Replace the lighting unit.
Activated Charcoal Filter (Recirculation Version)
This cannot be washed or regenerated, and must be changed approxi-
mately once every 4 months, or more frequently in the case of particu-
larly intensive use.
• Open the light unit.
• Remove grease filter.
• Remove the saturated Activated Charcoal Filters, as indicated (A).
• Fit the new Filters, as indicated (B).
• Fit the anti-grease filter and the Light Unit back into position.
Warning: This appliance is fitted with a white LED lamp classed as 1M according
to EN 60825-1: 1994 + A1:2002 + A2:2001 standards; maximum optical power
emitted @439nm: 7µW. Do not look directly at the light through optical devices
(binoculars, magnifying glasses...).
• For replacement contact technical support. ("To purchase contact technical sup-
port")
EN
Grease filter
CHANGING

Lighting unit

A
B
1 18