Care And Maintenance - Wagan Tech Auto Power Vacuum Manual De Usuario

OPERATION
1. Plug into a 12V power source, such an automobile cigarette lighter socket.
2. Turn ignition to the "accessory" position. If you plan on using the vacuum
for more than 15 minutes, you may want to run your engine to avoid
draining your battery (be sure you are parked in a well-ventilated area).
3. Turn off all other electrical equipment in the car.
4. Push the power switch to the ON position and begin vacuuming.
s Do not vacuum liquids or burning objects
s Do not cover either of the side air vents while using

CARE AND MAINTENANCE

1. To empty the vacuum, press the dust bin latch and separate dust bin from
motor unit.
2. Carefully remove the filter from dust bin and discard contents.
3. To clean filter, hand-wash with mild soap and water. The dust bin can also
be cleaned with soap and water.
4. The motor unit can be wiped with a damp sponge.
5. Allow all parts to dry completely before reassembling the vacuum.
s Do not submerge the motor unit
s Do not use when the filter is wet
s Do not run the vacuum without the filter in place
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2018 Wagan Corporation. All Rights Reserved.
2