Presentation And General Points; General Points; Transport And Packaging; Identification Label - Errebi ALFA Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 18
>>>
ENGLISH
1

Presentation and general points

The ALFA key cutting machine has been designed taking
into account the safety standards currently in force in
the EU.
Although the machine is not difficult to install, it is best
not to try to install, adjust or use it without having first
read this manual.
The machine leaves our factory ready for use and only
requires the carrying out of calibration operations for
the tools that are going to be used.

1.2 TRANSPORT AND PACKAGING

The machine comes packed in packing of the following
size:
Width = 570 mm, length = 520 mm, height = 410mm
Machine weight plus packing = 18.5 Kg.
When the machine has been unpacked, check carefully
to see if it has suffered any damage during transporta-
tion. If you find any problems, please inform the carrier
immediately and do not do anything with the machine
until the carrier's agent has carried out an inspection.
The ALFA key cutting machine has an identification
label, giving the serial number, the name and address of
the manufacturer, the CE mark and the year of manu-
facture.
>>>
6

1.1 GENERAL POINTS

1.3 IDENTIFICATION LABEL

See figure 1
2
Machine characteristics
The ALFA machine is a robust and precise manual machi-
ne for cutting flat cylinder lock keys, vehicle keys, cross-
shaped keys and special keys.
2.1 PARTS OF THE KEYS
1
Head
2
Neck
3
Top shoulder
4
Bottom shoulder
Teeth
5
6
Blade
Back
7
Tip
8

2.2 MAIN PARTS OF THE MACHINE

Milling cutter
1
2-sided clamp
2
Clamp handle
3
Slide
4
Slide handle
5
Fold-away stop
6
Tracer point
7
Start switch
8
Tracer point adjustment control
9

2.3 TECHNICAL DATA

The main technical information is as follows:
Motor:
Single phase 220V, 50Hz, 0.18Kw,1500 rpm, 1.7 Amp.
or
Single phase 110V, 60Hz,0.18Kw, 1800 rpm 3.14 Amp.
Extra quick speed steel Ø63 x 16 x5 mm.
Milling
cutter:
Speed:
1.500 rpm.
Clamps:
2 sided.
On self-lubricated bearings.
Displacement:
X axis = 70 mm
Effective
travel:
Dimensions:
Width = 470 mm, Depth = 245 mm,
Height = 280 mm.
Weight:
15 Kg.
See figure 2
.

Publicidad

Tabla de contenido
loading

Tabla de contenido