Maintenance And Cleaning; Troubleshooting - ECG RZ 11 Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 76
Tips for cooking rice
Rice is a valuable source of complex carbohydrates containing natural starch. We recommend that you
rinse the rice using cold potable water until it runs clear. This prevents the browning of rice and its sticking
to the bottom part of the vessel, however, it may also cause loss of some rice nutrients.
When you add more water, the rice becomes fl uffi er, when you remove water the rice becomes tougher.
Some types of rice need more water, for example wild rice, Arborio rice of short grain rice. Therefore always
adjust the recipe as needed. Proceed according to the instructions on the package of rice.
When cooking in a larger amount of water the inside of the lid may be splashed by water drops with starch.
To achieve the best results, rinse the rice before cooking and let it stand for 20 minutes after fi nishing
cooking to absorb the excess water.

MAINTENANCE AND CLEANING

After each use
After use, switch the cooker off and unplug it.
Before dismantling and cleaning, let all the parts cool off .
Wash the cooking vessel and lid in warm, soapy water, rinse and dry.
We do not recommend washing parts of the cooker in the dishwasher, aggressive agents and hot water
can cause stains and other damage to parts of the cooker.
Do not use abrasive cleaners, steel wool or wire brushes and abrasive sponges, the non-stick surface could
be damaged.
Do not immerse the body of the cooker in water or any other liquids.
You can wipe the stainless steel body of the cooker with wet cloth and then dry it off .

TROUBLESHOOTING

TROUBLE
The electric
heating tray is
not hot.
The indicator
1
is dark.
The electric
heating tray is
hot.
The electric
The indicator
2
heating tray is
is on.
not hot.
6
*approximate times for cooking white rice
The power cable or power
plug of the rice cooker is not
connected successfully.
1.
The cable to the indicator
or the voltage dropping
resistor becomes loose.
2.
The indicator or the
voltage dropping resistor
is damaged.
1.
The middle cable
becomes loose.
2.
The thermode part is
damaged.
CAUSE
Check whether the switch, the fuse
of power plug and power socket
and power cable are normal. Ensure
that the power plug is connected
successfully.
Send the rice cooker to the
designated maintenance & repair
center for help.
Send the rice cooker to the
designated maintenance & repair
center for help.
24–25
TROUBLESHOOTING
GB
41

Publicidad

Tabla de contenido
loading

Tabla de contenido