Other Functions; Cleaning, Maintenance And Storage; Technical Data - ECG NZ 322 Auto-Off Manual De Instrucciones

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68

OTHER FUNCTIONS

ANTI-CALC system
The anti-calc feature filters minerals contained in the water and prevents them from settling in the steam
chamber.
ANTI-DRIP system
The iron automatically stops the steam output when the temperature is too low to prevent water leaking from
the ironing area when the temperature is low.
The iron can cool down to a temperature at which the steam process is not carried out, however, drops of
boiling water can cause stains. The anti-drip system is automatically activated in cases like this, preventing the
vaporization process so you can iron even the finest of fabrics without the risk of staining or damaging them.
Self-cleaning mode
Attention: Perform the procedure above a sink or other suitable area.
Fill the iron tank using the supplied container to the maximum level, turn on the iron and set the temperature
control to the maximum temperature. After about 3 minutes, press auto-cleaning for about 1 minute. The
GB
steam chamber will be cleaned with a flow of steam and hot water. We recommend repeating this procedure
every 14 days.
Auto shut-off mode
If the iron is idle for a pre-defined time period, it will go into "auto shut-off" mode to save energy. Period for
going into the auto shut-off mode: 30 seconds in the horizontal position and 8 minutes in the vertical position.
Simply move the iron to restore normal mode.

CLEANING, MAINTENANCE AND STORAGE

After you have finished using the iron, open the nozzle lid, pour out the remaining water, set the steam control
to minimum and the temperature control to minimum. Always make sure the steam iron is completely cooled,
clean and dry before putting it away. Store the iron in an upright position.
Disconnect the appliance from the electrical output prior to performing any maintenance. Cleaning shall
always be performed on a cooled appliance!
Remove any sediments, starch residue or softener using a moist (or wet) dish towel or a fine liquid cleaning
agent and dry with soft dry fabric. Using wire wool or metal objects can scratch the soleplate. Never clean the
iron under running water, do not rinse or immerse the iron into water!

TECHNICAL DATA

Water tank capacity 360 ml
Nominal voltage: 220–240 V~ 50/60 Hz
Nominal input power: 2000–2400 W
38

Publicidad

Tabla de contenido
loading

Tabla de contenido