Kasanova PRO KIV000019NOC Manual De Instrucciones página 27

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

2 IN 1 CORDLESS VACUUM CLEANER
COMMON FAULTS AND PRODUCT PARAMETERS
S/ N
Phenomenon
1
Fail to work
2
Fail to suck dust
or weak suction
power
3
Dust leakage
4
Fail to suck dust
after connecting
with floor brush
COMMON INDICATION FAULTS OF FAULT INDICATING LAMP
If the three LED-lights on the battery pack turn red and
flash, it may have the following faults
*
After the switch button is long pressed for more than
6s, the machine will be shut down automatically and the three LED-li-
ghts turn red and flash. Press the switch button again to start the
machine
*
If the floor brush is blocked by foreign matters, the machine
will not be shut down automatically, but the three LED-lights will turn
red and flash; shut down the machine, remove the foreign matters in
the floor bush, and press the switch button again to start the machine
*
If the internal temperature of machine is too high, the machine
will start the overheat
function and be shut down automatically and the three LED-lights
turn red and flash. Restart the machine after its body is cool and it will
recover to normal.
*
The machine will be short-circuited and shut down automa-
tically after sucking liquid, and the three LED-lights will turn red and
flash quickly. Please don't start/shut down the machine repeatedly.
Remove the battery for recharging and restart the machine after trou-
bleshooting.
When the host motor is blocked by foreign matters, the machine
will work intermittently in the four "respiration" form and be shut
down automatically. Please restart after removing the foreign mat-
ters.
Possible cause
The battery is out
of power
The dust cup is
filled with dus The
battery power is
low
The dust cup is
filled with dust
The dust cup is
filled with dust
protection
Solution
Check whether the battery has
power or needs replacement
1- Clean the dust cup
2-Connect the power adapter
for charging
1-Clean the dust cup and install
it correctly
2-Connect the power adapter
for charging
Remove the dust and clean the
dust cup
27

Publicidad

Tabla de contenido
loading

Tabla de contenido