Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
access
CONEXIONES
4/2 WIRE SELECTION
Using this switch in the gure, the type of connection of the photocell is selected
DIP OFF (top) 4-wire connection.
DIP ON (bottom) 2-wire connection.
* This 2-wire connection has been designed for control boards that operate via "blue bus". With this 2-wire system, both the photo-
cell power supply and the safety signal are guaranteed.
ADJUSTMENT
Once the photocell has been installed, in case the beam is o -center, it can be readjusted using the 3 pcb screws located inside the
housing.
By default, the screws are unscrewed 1 turn, and a maximum of 3 complete turns can be made. The optical sensor is correctly aligned
when the green LED turns o .
DIMENSIONS
OUTPUT
DECLARATION OF CONFORMITY
EMC directive 89/336 / EEC
EN 61000-6-2
EN 61000-6-4LKED
Opening your life
REFLECTOR
Screw-in re ector mirror
Mirror diameter: 83mm.
Case diameter: 90mm.
Range: approx 15m.
Publicidad
Tabla de contenido
