Sony QN-022PCM Manual De Instrucciones página 9

3
Insert your PCMCIA card into an
available slot (type II or III).
4
Plug the PSTN connector into the
telephone socket.
Note
When using the PSTN Travel Cable, your communication
package will only operate correctly on a direct, analogue
telephone line, both when sending and receiving. When
connecting it to an automatic switched system (standard
or PABX), make sure your telephone line is an analogue
line. Please note that this type of system may cause
communication problems. Typical difficulties are
associated with detecting dialling tones and special
ringing tones which do not conform with the common
agreed standards.
5
Make sure that the PCMCIA card is
recognised by your PC.
7
QN-022PCM 3-860-382-11
GB
GB