FONESTAR MAZ-6600RU Manual De Instrucciones página 2

EN
DESCRIPTION
- Multizone amplifier with matrix with 5 input channels to 6 output zones with independent volume control.
- USB/SD/MP3 player with digital FM radio tuner.
- Suitable for commercial installations with several zones and different musical programs.
CONTROLS AND FUNCTIONS
FRONT PANEL
INPUT 1: input 1 volume control.
1.-
BASS/TREBLE (INPUT 1): strengthens or weakens the bass and treble frequencies from channel 1, ±10 dB.
2.-
CHIME: button that activates the musical chimes. The audio in the rest of the inputs is automatically
3.-
cut off and only the mic input INPUT 1 can be heard.
PRIORITY MIC: priority mic. level input, 6.3 mm jack connector.
4.-
INPUT 2-4: volume controls for inputs 2-4.
5.-
BASS/TREBLE (INPUT 2-4): strengthens or weakens the bass/treble frequencies in channels 2-4, ±10 dB.
6.-
ZONE 1-6 (INPUT 2-4): controls for allocating the corresponding input signal to one or several output
7.-
zones. To allocate one input channel to one or several output zones, press the output zone buttons
(ZONE 1 to 6) in the corresponding input channel, depending on the which one you want the selected
input channel to be heard through.
ZONE 1-6 (INPUT 5): controls for allocating the input 5 signal to one or several output zones. To allocate
8.-
input channel 5 to one or several output zones, press the output zone buttons (ZONE 1 to 6), depending
on which one you want it to be heard through.
INPUT 5: line level aux input, 3.5 mm jack connector.
9.-
10.- HEADPHONES: headphone output volume control.
11.- Headphone output, 6.3 mm jack connector.
12.- ZONE 1-6: output zone volume controls.
13.- MON 1-6: controls for allocating the required output zone signal to the monitor output (headphones).
To allocate the required output zone to the headphone output, press the corresponding MON 1-6
button.
14.- ZONE 1-6 (FM RADIO & MP3 PLAYER): controls for allocating the USB/SD/MP3 player module and
radio tuner signal to one or several output zones. To allocate this channel, press the output zone buttons
(ZONE 1 to 6) you want to hear it through.
15.- USB/SD/MP3 player module with digital FM tuner.
16.- CLIP Z1-Z6: LED clip indicators for output zones 1 to 6. They light up red when the level in the
corresponding output zone is very high. Lower the volume using the corresponding controls until the
LED indicator does not light up or it does so occasionally.
17.- SIGNAL Z1-Z6: LED indicators for output zone 1 to 6 signals. They light up green when a signal is
detected in the corresponding output zones.
18.- LED power indictor for the device (blue).
- 2 -