Operating The 2-Button Hand Switch; Drive Up To Position Manually - RK Rose+Krieger RKSlimlift Manual De Servicio

7. Working life

7.4 Operating the 2-button hand switch

You control drives with the keypad on the 2-button hand switch.
Should the controller not work correctly, the mains plug is to be pulled out imme-
diately and the technical staff (Service) informed.
7.4.1 Overview of the 2-button hand switch
Drive DOWN
2
The drive moves when the button is pressed.
Drive UP
3
The drive moves when the button is pressed.

7.4.2 Drive up to position manually

•
Press the DOWN or UP button and keep the relevant
button pressed until the drive
•
has moved into the desired position.
Ensure that nobody is in the vicinity of the drives when they are moving.
Therefore, only use the hand switch if you can see the drives - danger - risk of acci-
dent!
Motion only takes place while you are holding the button down. Release the button only after the
stored height is reached or in case of acute danger.
24
2
3
RK-0006