Switching On/Off / Selecting A Heat Level; Using The Attachments; Cleaning And Care - Kompernaß KH 1804 Instrucciones De Uso

Switching on/off /
Selecting a heat level
When you have attached the required accessory
and inserted the plug into the power socket, you
can switch the appliance on with the step switch
e and select the output level:
„0" The appliance is switched off
„C" for a cold air-flow
„1" for a reduced air-flow strength with heat
„2" for a high air-flow strength with heat
You switch the appliance off by sliding the step
e
switch to the position "0" (= appliance off).

Using the attachments

Warm-air round brush
The warm-air round brush
styling of thicker strands or waves.
1. Attach the warm-air round brush
appliance as described in the chapter "Atta-
ching/detaching accessories".
2. Slide the step switch
3. Take hair strands with a maximum width of 5 cm
(ca. 2 in) and wrap them from the ends to the
roots around the warm-air round brush
4. When the strands of hair are dry, press the
w
release button and guide the warm-air round
brush u slowly back through the hair. As the
warm-air round brush
of the pressing of the release button
possible to draw it from the hair without the
styling being stressed.
5. Comb the hair through when it has cooled
down.
u is intended for the
u onto the
e
onto the desired setting.
u
.
u can turn itself because
w
, it is
Brush attachment
The brush attachment
pony-tails or thin strands.
1. Attach the brush attachment
as described in the chapter "Attaching/detaching
accessories".
2. Slide the step switch
3. Style the pony-tail or strands as desired.
4. Comb the hair through when it has cooled
down.
Volume attachment
The volume attachment
into the hair. You can use the volume attachment
i
either directly at the hair roots or at any position
along the length of the hair.
1. Take ca. 5 cm (ca. 2 in) wide strands and slide
them between the fingers of the volume attach-
i
ment .
2. Turn the volume attachment
ired shape and fullness.
3. Allow the warm air to take effect for a few
seconds.
4. Pull the volume attachment
pressing the unlocking device

Cleaning and care

Never open the housing of the appliance. There
are no operating elements inside. An open
housing will create the risk of a potentially
life-threatening electrical shock .
Before cleaning the device, ....
• always disconnect the power plug from the
power socket
• and let it cool down completely.
- 16 -
o is suitable for styling
o
onto the appliance
e onto the desired setting.
i helps to bring fullness
i
to obtain the des-
i from the hair without
w
button.