WS WPT R Manual De Instrucciones página 12

5. Press ▲▼ to set the desired backlit brightness.
Press Esc to quit the menu.
INSTALLER MENU (Fig.12)
In OFF mode, hold OK for 10 seconds to enter the menu:
Press ◄► to browse the available options.
1. Antifrost = Set antifrost threshold (standard 6.0°C);
2. Hysteresis = Switching differential (standard 0.2°C);
3. Offset = temperature calibration (standard 0.0°C);
4. NTC Internal / NTC External ;
5. Hold OK to reset and restore factory settings.
6. Confirm with OK to pair the device with the radio receiver and wait for the conclusion of the pro-
cedure. If the communication is activated, RADIO OK will appear on the display; otherwise RADIO ERR
will appear.
Press Esc to quit the menu.
HUMIDITY DISPLAY OPTION (AVAILABLE ONLY ON WPT RH MODELS)
In one of the operating modes, press OK to switch between the set temperature or room humidity display
in the top right of the screen (Fig.13).
Manuale WPT R multilingue interno.indd 12 22/01/16 14:56