Western Co Wmarine10 Manual Del Usuario página 14

Visualizations
Main page.
It displays the battery voltage (V
FLOOD), the day/night status detected by the PV module. The load icon, if ON, indicates that the
load is power supplied.
button
It displays the current (I
module depends on its state of sun-lighting and on battery charge status. With charged battery
(Vbatt>14,4V @12V o Vbatt>28,8V @24V) and even with a good lighting of the PV module, you
have low charge currents since the controller limits such current so to avoid the battery
overcharge.
button
PV module voltage (V
button
It displays the power in watt actually delivered by the PV module.
button
It displays the counter of energy that is delivered by the PV module in KWh. It is possible to reset
this measure pressing simultaneously the buttons
button
It displays the charge current inside the battery (I
button
It displays the battery temperature that is currently measured by the temperature sensor
connected to WMarine10.
button
It displays the current that is currently delivered to the load; even if in this screen the load icon is
on, this does not mean that it is effectively power supplied; in fact the load is controlled according
to the management load program that is currently set.
button
It displays the power that is currently delivered to the load in watt.
button
Only displayed in the configuration screens
Day/night status
Indication of current
absorption from the
PV module
It indicates which charge
program is currently set It displays internal measures
) of the PV module. We remember that the current delivered by the PV
PAN
).
PAN
WMarine10
User manual
Low battery protection
Load turning on
Indication of current
absorption on the load
Voltage level inside the
battery
), the charge program currently selected (either SEAL or
BAT
for 2 seconds.
).
BAT
EN
4