Operation By Remote Control - Ibiza Light LED-LAMP-BT Manual De Uso

Lampara de led con funcion blue tooth
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 20
GB
INTRODUCTION
This LED table lamp with Bluetooth music play functions is a multifunction LED colourful scene light. You can
select among a large variety of colours and listen to your favourite music via the Bluetooth function.
WARNING!
- This is not a TOY. Keep it out of the reach of children.
- Keep all products away from chemical, any liquid, or heat.
- Do not submerge the lamp into water.
- To reduce the risk of electric shock, never open the light bottom.
- USB charging lead: Never use the USB charger lead for purposes other than battery charging for the lamp
supplied in the same pack.
Operation
WARNING! Never charge the product outdoors or in a wet location. Charge in a dry, indoor location only.
Note: The light and Bluetooth will be automatically off when charging.
Charging the light:
Insert the USB lead into the DC 5Vsocket
Connect the other end of the USB lead to your computer or an appropriate mains adaptor.
It will begin to charge and the charging indicator light will turn on red. The charging indicator
light will turn to green after full charged.

Operation by Remote Control

NOTE: First remove the small plastic sheet from the battery cover before operation
1.
Brightness intensity and speed button: Adjust the speed when in smooth modes.
Change brightness intensity when the light is fixed on one single color.
2.
ON/OFF button: Press this button to turn on and turn off the light. This button only
controls the light but not the Bluetooth function. If the unit is charged, the last set
mode is kept in memory and the cube will be set on the last set mode. If the battery is
exhausted, the default mode is SMOOTH.
3.
Bluetooth ON/OFF button: Press this button to turn on and turn off the Bluetooth
function. After one press, the Bluetooth function is activated. The Bluetooth indicator
light will start flashing in blue and a sound is heard. Activate the Bluetooth function on your mobile phone to pair
it with the LED-LAMP-BT. Once the Bluetooth is connected to your mobile phone, the Bluetooth indicator will light
up steadily in blue.
If you leave the range of 10m around the lamp, the Bluetooth indicator will flash in
blue.
The Bluetooth indicator light is inside the lamp below the speaker. The Bluetooth
indicator light goes off when the Bluetooth is off.
Once the Bluetooth is connected, press the button again to disconnect the Bluetooth.
Only one mobile phone can be paired at the same time with the LED-LAMP-BT.
©Copyright LOTRONIC 2017
LED-LAMP-BT Manual
2

Publicidad

Tabla de contenido
loading

Tabla de contenido