MANUAL DE INSTRUCCIONES CÓDIGO 80176 REV A
Especifi caciones técnicas
• Rango de velocidad:
• Volumen máximo:
• Dimesiones: (mm)
• Alimentación:
• Consumo:
Lista de embalaje
• Agitador
• Adaptador de corriente
• Imán tefl onado Ø8 x 32 mm
• Manual de instrucciones.
Accesorios
Varilla y pinza de soporte: ref 7001639
Instalación
Enchufar el equipo al adaptador de corriente 9Vdx
y el adaptador a la red. Comprobar que la tensión
de red corresponda a la indicada en la etiqueta del
equipo.
Operación
Situar el vaso con el líquido a agitar en el centro del
agitador. Insertar el imán.
Accionar el interruptor principal y seleccionar la
velocidad mediante el potenciómetro.
Atención
Para evitar salpicaduras, girar el potenciómetro de
selección de velocidad lentamente.
Garantía
Este producto tiene una garantía de un año. Esta no
cubre los daños causados por un uso indebido o por
causas ajenas a J.P. SELECTA, s.a.u.
Cualquier manipulación del equipo por personal
no autorizado por J.P. SELECTA, s.a.u. anula
automáticamente los beneficios de la garantía.
DECLARACIÓN DE CONFORMIDAD "CE" / COMPLIANCE DECLARATION ''CE''
El Fabricante / Importador - The Manufacturer / Importer
J.P. SELECTA, s.a.u., Autovía A2 Km 585,1 08760 ABRERA (BARCELONA) España
Declara que los equipos / States that the equipment:
Modelo / Model:
código / product reference:
Cumplen las directivas siguientes / Fullfi l the following safety standards:
73/23/CEE
Seguridad eléctrica / Electrical safety
89/336/CEE
Compatibilidad electromagnética / Electromagnetic compatibility
Cumplen las Normas Europeas / Through the fullfi ment European Standards:
EN 50081-1
EN 50082-1
J.P. SELECTA, s.a.u.
Sept/2016
0...1700 RPM
2 litros
Ø120 x 50 mm
9Vdc
3 W
AGIMICRO
7001638
EN 61010-1
Autovía A2 Km 585,1 08630 - Abrera (Barcelona) España
e-mail: selecta@jpselecta.es - http://www.jpselecta.es
(Sujetas a modifi caciones sin previo aviso)
Technical specifi cations
• Rank of speed:
• Maximum volume:
• Dimesions:(mm)
• Supply:
• Consumption:
Packing list
• Stirrer
• Power adapter
• Tefl on coated magnet Ø8 x 32 mm
• Instructions manual.
Accessories
Rod and support clamp: code 7001639
Installation
Connect the equipment to the 9Vdc power adapter
and the adapter to the power supply. Verify that the
supply voltage meets to the indicated one in the label
of the equipment.
Operation
Place the glass containing the liquid to stir in the
center of the stirrer. Add the magnet.
Turn on the main switch and select the speed by
means of the potenciometer.
Attention
To avoid splashes, turn slowly the speed selection
potenciometer.
Warranty
This product is guaranteed for one year. It does not
cover damages caused by an incorrect use or causes
beyond the control of J.P. SELECTA, s.a.u.
Any manipulation of the equipment by personnel not
authorized by J.P. SELECTA, s.a.u. automatically
cancels the guarantee.
:
Tel (34 3) 770 08 77 Fax (34 3) 770 23 62
0 ... 1700 RPM
2 liters
Ø120 x 50 mm
9Vdc
3 W
J. PUIG
Director General