Roadstar KS-250/GR Manual De Instrucciones página 3

When setting g as weight unit, the default volume unit is ml;
* When setting lb:oz as weight unit, the default volume unit is fl'oz.
Remark: The unit system of scale depends on sales destination or the requirement of
distributor.
TO START WEIGHING
1. Weighing mode
A. Place the scale on a solid and flat
surface.
B. Place bowl (if used) on the scale
before turning on the scale.
C. Gently press on the scale by hand
to turn on
D. Wait until LCD shows all information.
E. Load weighing object on to start
weighing,LCD wil l show the weight
reading.
F If the weighing object is water or milk,
press MODE button to choose volume
mode and view the volume of weighing
object.
English
3
2. Volume indication mode
A. Place the scale on a solid and flat surface.
B. Gently press on the scale by hand to turn
on
C. Wait until LCD shows "0", and press
MODE button to choose "Water" or "Milk"
mode.
D. Put a liquid container onto the scale
platform.
E. Press ZERO button to reset LCD to "0".
F. Pour liquid (water or milk) into the
container, LCD shows the volume of the
liquid.
G. Press MODE button to choose "Weight"
mode and view the weight of liquid.
English
4