Extraordinary Maintenace; Replacement Of Brushes - Mazzoni Flash 650M Manual De Uso

FLASH 650M – FLASH 950M
950M
EXTRAORDINARY MAINTENANCE

REPLACEMENT OF BRUSHES

Central brush:

Remove completely the front basin for wastes;

Unscrew the two clamping screws (1);

Extract the central brush (2) as shown in Figure;

Assembly the new brush following the above-mentioned stages
backwards.
Lateral brush:

Lift the brush support arm to a vertical position.

Unscrew fastening screws (1) and remove the worn brush.

Reassembly the new brush following the above-mentioned stages
backwards.
N.B.: After installing new brushes, check their height. If necessary,
adjust them.
26