Recommendations For Installation; Elements And Dimensions - Erreka LEOBOX Manual Del Instalador

WARNINGS AND DESCRIPTION OF THE DEVICE
1
WARNINGS
Importance of the Manual
This installation manual is for use by qualified staff for
the fitting of automatic doors and access doors. To
ensure the correct, secure installation, the fitter must be
suitably qualified and must follow all the indications
given in this manual. Read the manual fully before
starting the fitting process.
Operation of the Device and Appropriate
Use
The LEOBOX release case is designed to perform the
functions of a key selector and control for manual
release, on automated doors and access doors. The
device must only be fitted to perform these functions.
Inappropriate use may lead to faults and dangerous
situations.
2

ELEMENTS AND DIMENSIONS

Fig. 1 Elements and Dimensions
10
Installer's manual

Recommendations for Installation

• This device is not suitable to be fitted in inflammable
or explosive environments.
• The device should be fitted so that when it is
activated the operator is outside of the door's risk
area.
Symbols used in this Manual
In this manual symbols are used to highlight certain
texts. The functions of each symbol are explained
below:

Safety warnings, which if not followed could
lead to accidents or injury.

Important details which must be taken into account.

Additional helpful information.
}
Information in reference to environmentally friendly
actions.
Elements
1 Lock
2 Key
3 Swivel cover
4 Release handle
i
Dimensions in mm