Automatically Adjusting The Size And Centering Of The Picture; Selecting The On-Screen Display Language; Selecting The Input Signal - Sun 21-Inch Premium Manual De Instrucciones

Automatically Adjusting the Size
and Centering of the Picture
By pressing the auto sizing and centering (
size and centering of the picture are automatically adjusted
to fit the screen.
1
Turn on the monitor and computer.
2
Press the button.
The picture is adjusted to fit the center of the screen.
Notes
• This function may not work properly if the background color is
dark or if the input picture does not fill the screen to the edges.
• The screen may go blank for a few seconds while performing the
auto-sizing function. This is not a malfunction.
• Although the signals for picture aspect ratio 5:4 (resolution: 1280
× 1024) do not fill the screen to the edges, the picture is
accurately displayed.
Selecting the On-screen Display
Language
If you need to change the OSD language, see "Using the
LANG (Language) On-screen Display" on page 16.
The default setting is English.

Selecting the Input Signal

This monitor has two signal input connectors (13W3 pigtail
cable and HD15 connector) and can be connected to two
) button, the
computers. When the power of both computers is on, select
the input signal you want to view as follows.
1
Turn on the monitor and both computers.
2
Press the
input signal.
Each time you press the
corresponding indicator alternate.
Selecting the INPUT signal mode
This monitor has two modes of input signal selection,
"AUTO" and "MANUAL."
When "AUTO" is selected
If no signal is input from the selected connector, the monitor
automatically selects the other connector's signal. When you
restart the computer you want to view, or that computer is
in power saving mode, the monitor may automatically
select the other connector's signal. This is because the
monitor switches from the interrupted signal to the constant
signal. If this happens, manually select the desired signal
using the
When "MANUAL" is selected
Even if no signal is input from the selected connector, the
monitor does not select the other connector's signal.
1
Press the
The MENU OSD appears.
Getting Started
Getting Started
button to select 1 (13W3) or 2 (HD15)
button, the input signal and
button.
button.
MENU
COLOR
GEOM
LANG
EN
F
ES
C
OK
MENU
CENTER SCREEN
EXIT ZOOM
SIZE OPTION
(continued)
7