DURAVIT 720141 Instrucciones De Montaje Y Uso página 7

7
6x
WARNING
Fatal injury by electric shock!
Contact with electrical wiring can lead
to electrical shock.
> Make sure that there are no
electrical wires or heating running
under wall or floor which could be
affected by the installation.
> Affix 6 flange clips to the wall frame
for side support of the shower tray.
10
> Finish wall and tiles.
> Make sure to install water-resistant
wallboard.
8
> Connect shower drain (not included)
to drain pipe.
11
~110 lbs
~50 kg
NOTICE
Apply silicone recommended for acrylic
shower trays only.
> Weigh down the shower tray with a
heavy object.
> Apply silicone as needed.
> Let it sit for 24 h.
9
> Fill the shower tray with water.
> Inspect for potential leaks.
12
> Remove weight.
57220_MAL_Shower tray_Tile flange_US/20.01.2
7