Descargar Imprimir esta página

TooQ TQEP-500SP Manual De Usuario página 11

Fuente de alimentación atx

Publicidad

Idiomas disponibles

Idiomas disponibles

3. Perform the same process with the secondary cable that supplies an additional 12V.
This cable usually has 8 pins (4 + 4), but only four may be required depending on the
type of motherboard.
4. Connect each of the hard drives and optical drives using the SATA, MOLEX or FDD
connectors provided for them. Keep in mind that each device requires its power and
data cable to be connected.
5. Finally, if you have a graphic card that requires additional power, locate and connect the
PCI-e (6-pin) or (6+2-pin) connector on your graphic card. Allowing the separation of these
additional 2 pins depending on the power you need.
6. Once the installation is complete, connect the power cord to the power and set the
switch to "I" position, then turn on the computer.
Warranty:
TooQ offers a 24 months warranty from the time of purchase, so it is necessary to
have the ticket or invoice where the date appears. The distributor or seller where you
purchased this product will respond to your claim and offer your technical service
while the warranty is in effect.
Out of warranty:
The warranty does not cover damage or defects caused to the power
supply due to:
• Do not follow the user manual.
• Modifications or alterations of any kind.
• High and low temperatures, humidity or contact with liquids.
• Supplying an incorrect voltage.
• Using a device other than a computer.
The warranty does not cover damage or defects caused by your minuse. If you are
not familiar with your installation, we recommend that you ask a professional for help.
11

Publicidad

loading