Proper Usage - Chauvet DJ EZMIN FX Manual De Usuario

Proper Usage

This product is for overhead mounting only. For safety purposes, Chauvet
recommends mounting lighting effect products on steady elevated platforms or
sturdy overhead supports using suitable hanging clamps. In all cases, use
safety cables. Obtain appropriate mounting hardware from your lighting vendor.
International laser safety regulations require that laser products must be
operated in the fashion illustrated below, with a minimum of 9.8 feet
(3 meters) of vertical separation between the floor and the lowest laser
light. Additionally, 9.8 feet (3 meters) of horizontal separation is required
between laser light and audience or other public spaces.
3 meters
3 meters
CAUTION! USE OF CONTROLS, ADJUSTMENTS, OR PROCEDURES
OTHER THAN THOSE SPECIFIED IN THIS USER MANUAL MAY RESULT
IN HAZARDOUS RADIATION EXPOSURE.
Page 14 of 52 EZMiN™ Laser FX/RBX User Manual Rev. 4