Olympus DM-20 Manual De Instrucciones página 36

Ocultar thumbs Ver también para DM-20:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Connecting to Your PC
Macintosh
1
Move the icon of the recorder's drive displayed on desktop to trash box by drag
and drop.
2
Disconnect the USB cable.
3
.................................................................................................................................................................
Notes
• NEVER disconnect the USB cable while the record/play indicator lamp is flashing. If you do, the data will be
destroyed.
• Refer to the user's manual for your PC regarding the USB port or USB hub on your PC.
• Be sure that you connect the USB cable either directly to the USB port on your PC or the self-power (AC
adapter connection) USB hub.
• Be sure to push the cable connector all the way in. Otherwise, the recorder may not operate properly.
• Release the HOLD switch.
• When the recorder is connected to a PC, the power will be supplied from the USB cable.
Connecting to your PC using the cradle
Place the recorder on the cradle
1
Insert end A of the USB cable to your PC's
USB port or USB hub.
2
Connect the end b of the USB cable to the
cradle.
3
Make sure that the recorder is in the Stop
mode,and place it in the cradle.
1 Set the recorder vertically.
36
2
1

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Dm-10

Tabla de contenido