Disarm Password - Cygnus electronics VRX-307W Manual De Usuario

 To setup the Alarm delay. It means when the sensor triggered,
there will be 90 seconds delay time to announce the
notification.
 The Status in the corresponding zone means whether the zone
is available or not.
 Press Save in the top right corner to save the modification.
On the web portal, users can go to Arming - Arming Mode to
configure.

2.6.2. Disarm Password

On the device, go to Arming - Disarm Password to enter the
disarm password settings interface. Users can modify the disarm
password here.
 Enter the original password first, and it is 0000 by default.
 Enter the new password.
 Enter the confirm password for confirming.
info@cygnus.la
Manual de usuario VRX-307W
Figure 2.6.1-2 Arming mode
Figure 2.6.2-1 Disarm password
cygnus.la
22