Nowsonic AUTARK OD09 Manual Del Usuario página 12

Nowsonic Autark OD09
GB
User manual
Activating the internal W-DMX receiver
Using the
d d
= receiver enabled, 0ff = receiver disabled7off ). When
you confirm 0n with the
reads fun and the receiver is activated.
Confirm your entry by pressing the
d d
Displaying the operating time
Using the
d d
you confirm u10 with the
operating time is displayed.
Exit the display by pressing the
d d
Choosing Slave mode
Using the
d d
rate the Autark
device. When you don't select SLA, the Autark
always operates in master mode.
Confirm your entry by pressing the
d d


and buttons, select the desired option (0n
ENTER
button, the display
ENTER button.


and buttons, select the item u10. When
ENTER button, the current
ENTER button.


and buttons, select the SLA entry to ope-
in Slave mode with another Master
OD09
ENTER button.
When the password protection for Autark
enter the newly defined password before the menu settings can be
edited: this protects the Autark
To disable the password protection and to edit the menu of Autark
OD09 , proceed as follows:
1) Tap the
ENTER
buttons.
2)
When 11--, 1---, 1-1- or 1--1 is displayed, you must repeat
the process: the menu is only released, when the display shows
111- or 1111. If entered correctly, a tone will sound.
OD09
12
www.nowsonic.com
is enabled, you must
OD09
against direct access.
OD09
button and swipe from left to right over all