First Steps; Inserting The Batteries - Dörr SNAPSHOT MINI BLACK 12MP HD Manual De Instrucciones

04 | NOMENCLATURE
01 Infrared LEDs
02 LED indicator/light sensor
03 Motion detector (PIR sensor)
04 Microphone
05 Camera lens
06 Tension lock
07 Eyelet for U-lock (lock optional)
08 LCD camera display
09 Slide control (ON/Setup/OFF)
10 MENU button
11 Navigation buttons
12 OK button
13 Battery compartment
14 Connection external battery
15 Mini USB port
16 SD card slot
17 ¼" thread mount
18 Eyelet for cable lock (lock optional)
19 Eyelets for mounting strap
20 Mounting strap
21 USB data cable

05 | FIRST STEPS

CAUTION
To avoid camera damages, make sure that camera is switched off (slide control 09 = OFF) for the following steps!

05.1 Inserting the batteries

CAUTION
Make sure to use only fresh Mignon AA LR6 1.5V Alkaline Manganese batteries of the same type and brand. When inserting the
batteries please respect the correct polarity (+/-). Please remove batteries when device is not in use for a longer period.
Do not use rechargeable batteries. They may lead to malfunction.
Open the camera releasing the lateral tension locks (06). Make sure that the slide control (09) is on position OFF. Insert 8 AA 1,5V
batteries (optional) into the battery compartment (13). Respect correct polarity (+/-).
17 doerr-outdoor.de