Publicidad
Idiomas disponibles
Idiomas disponibles
3. Use
3.1. Before the first use.
1. Fill the kettle with cold water up to the maximum level indicator (1.7L).
2. Boil the water twice without adding anything.
3. Once you have done this, you may begin using the appliance.
3.2. Use of appliance
When the appliance is plugged in, the LEDs on all the buttons will flash for 5 minutes; this means that
the kettle is in standby mode.
These lights will go out if the appliance is not used for 5 minutes.
1. Open the lid to fill the kettle.
2. Fill the kettle with cold water only to the water level indicator (MIN-MAX).
Warning: if the kettle is overfilled, boiling water may splash out.
3. Press lightly to close the lid until it locks (clicks).
4. Place the kettle on the heating base.
5. You can choose between 5 heating temperatures: 60 °C, 70 °C, 80 °C, 90 °C or 100 °C.
Press the button corresponding to the temperature of your choice. The LED on the button will flash
when the water is heating.
6. The LED will stop flashing once the selected temperature is reached. This light will go out
automatically if the appliance is not used for 5 minutes.
Warming function
1. You can choose between 4 heating temperatures: 60°C, 70°C, 80°C or 90°C. Press the button
corresponding to the temperature of your choice, then press th warming button.
2. The LED on the button for the temperature selected will flash when the water is heating and
will stop flashing when the temperature is reached.
1. Lid
2. Filter location
3. Lid release button
4. Water level indicator
5. Handle
6. Base of appliance
7. Warming button
8. 60°C temperature button
9. 70°C temperature button
10. 80°C temperature button
11. 90°C temperature button
12. 100°C temperature button
Publicidad
