LaserLiner DigiLevel Pro 30 Manual De Instrucciones página 9

Selection of unit of measurement:
• Button (5) allows the desired unit of measurement to be selected
(° degrees, %, IN/FT)
1
2
3
15
11
12
Acoustic signal:
• The acoustic signal can be switched on or off with button (3).
• When the angle of slope stands at 0°, 45°, 90° or the most recently
stored value, this is indicated by an acoustic signal.
NOTE: When working with a changed angle reference value,
the acoustic signal is activated on reaching the new reference value
(0°, 45°, 90° display).
DigiLevel Pro 30/60/120
7
Keypad
1. (REF) – Angle reference value setting
2. (
3. ( ) )
)
)
4. (MR) – Memory retrieval
5. (UNIT) – Unit of measurement selection
6. (M)
Display
7. Slope direction
13
8. Slope angle
17
9. Current memory position (M1 – M9)
10. Battery charge
16
DigiLevel Pro 30/60/120
11. Vertical vial
12. Horizontal vial
13. Magnets
14. Measuring surface
15. Point laser ON / OFF
16. Tripod threads, 1/4"
Rear
14
17 . Battery compartment
8 9 10
) – ON / OFF switch
– Acoustic signal on/off
(° degrees / % / IN/FT)
– MEMORY function
4
5
6
09
GB