Inserting The Battery - LaserLiner SensoLite 120 Manual De Instrucciones

Inserting the battery

In order to preserve the
battery life, the receiver
switches off automatically
if it is not used for around
5 minutes.
Working with the laser receiver
Set the rotary laser to maximum speed and switch the laser receiver on.
It is able to detect the laser beam at a great distance now. Move the
SensoLite up and down through the laser beam until the middle indicator
appears. Mark the measured height at the perimeter marking groove.
rapid peeping
The laser receiver has two tolerance settings:
– yellow LED = Free-hand range: Display with larger tolerance
!
for rough alignment by hand.
– green LED = Precision range: Display with smaller tolerance
for precision alignment (e.g. levelling staff).
Laser
Continuous tone =
mark the reference
SensoLite 120
slow peeping
EN
07